Kumpulan Contoh Teks Prosedur dalam Bahasa Inggris yang Mudah Dimengerti

                                                          How to Insert Sim Card Cellphone

Cellphone is a modern communication device which connects one to the others by voice, written message and data. However, this device cannot work until the SIM card is inserted. When inserting the SIM Card to cellphone, make sure that the cellphone has been switched off and follow the directions bellow :

1. First of all, press the locking catch and slide the cover then lift it off the phone.

2. After that, push two catches in the opposite directions and remove the battery.

3. Next, slide the SIM card carefully into the slot and make sure that the golden connect arson are facing to the connector of the phone.

4. Then, put the battery and align it until snaps into its place.

5. Finally, insert the two catches of the back cover corresponding slot in the phone and slide the cover forward button of the phone until locks into place. Don’t forget to switch on the cellphone. Wait until it is ready to use.

                                                    How to Cook Rice In A Rice Cooker

• First, rinse a cup of rice in cold water. Rub the rice softly under the running water. Do not rub the rice too long, because it will lose the nutrients. Wash the rice once again. Then drain the water from the rice.
• Next, add a cup of water. If you cook rice using an electronic rice cooker, pay attention to the water ratio. The rice and the water ratio is usually 1 part rice to 1 part water.
• Then, place the cooking pot in the rice cooker properly. Cover the pot. Select the cooking button right after the light on the rice cook cook turns.
• Finally, when the rice has been cooked and is resilient, flip through the rice very gently using a rice spatula

                                                       How to Use Glue Gun

1. First, check and clean the glue gun from any old glue clogging in the nozzle.

2. Second, put the glue stick into the gun nozzle.

3. Third, insert the plug into the electricity socket.

4. Fourth, prepare a sheet of paper and put the glue gun on it.

5. Fifth, wait until the gun get warmer.

6. Sixth, squeeze the trigger gently to check if the glue stick has changed into liquid form.

7. Finally, you can apply it on any surface that you want to stick by using this glue gun.

                                                                         How to Use ATM

ATMs, or Automated Teller Machines, provide a simple, convenient way to access your bank account from just about anywhere. Though ATMs may seem confusing at first, they’re actually incredibly straightforward and easy to operate.

1. Practice basic safety procedurs.

Make sure that the area is well lit and you are alone.

2. Insert your debit card into the ATM.

Mobile banking cards come in two varieties — debit cards and credit cards. Debit cards are most frequently used in ATMs; they're linked to the exact amount you have in your bank account

3. Try to use ATMs and debit cards that are issued by the same bank.

Most ATMs will offer transactions in several different languages, usually at least three or more dependent on where you live.

4. Select your language.

Most ATMs will offer transactions in several different languages, usually at least three or more dependent on where you live.

5. Enter your PIN when prompted.

"PIN" stands for "personal identification number," and it's typically a four-to six-digit password people use to access their bank account

6. Withdraw money.

You can withdraw money for almost any ATM, regardless of the associated bank

7. Deposit money.

You can deposit money as well, as long as you are using an ATM associated with your bank

8. Check your account balance.

You should have the option to check your account balance, or how much money you have available in your account

9. Follow the prompts to end your session.

Once you've completed your transaction, you'll have to follow the on-screen prompts in order to exit out and get your card back

10.Don't forget to take your card and money!

It's easy to forget to take your money or vcard when you're in a hurry, but be careful and be extra sure to take all of your belongings when you're done.

                                                     How to Use A Blender

1. Prepare the ingredients that you want to mix. The ingredients can be vary, but mostly people use blender for these following things: Ice, vegetables, fruits, milk, or any kind of food and drinks.

2. Cut the ingredients into smaller pieces if the ingredients were solid and big.

3. Prepare the blender cup, make sure to clean it before we use it and put the blender blades on the bottom of the cup.

4. Place the blender cup on the blender machine.

5. Insert the plug into the electricity socket.

6. Put all of the ingredients into the blender cup.

7. Add some water to help the blender mix the ingredients evenly.

8. Close the lid and cover the blender cup tightly.

9. Start the blender by pressing the speed button, you can start from the medium speed.

10. Wait until we get the right texture of the mixture, we can adjust the speed and also add some more water if necessary.

                                             How to Pass an Interview

1. Prepare to describe your work history briefly. Spend most of your time on the recent portion of your career. Go through the beginning rather quickly. 2-3 minutes total should be your target.

2. Explain why you’re interested in interviewing with them. After walking them through your resume, you’ll probably be asked why you’re looking to make a job change, and/or why you’re interested in their company in particular. You should already have two specific reasons for wanting to interview with their company.

3. Answering technical questions- don’t freak out. Try to work your way through the question as much as you can. Your thought process is often more important than answering correctly, so tell them what you’re thinking. Ask questions to clarify if needed.

4. Ask your own questions at the end. You should ask a lot of questions after the interviewer has finished their own questions.

5. Always act like you want the job

6. You have one goal in any interview: Convince them that you’re the best candidate for the job and get invited to the next round. So you should be selling yourself in the interview, not deciding if the job is desirable.

7. Don’t ask for feedback on the spot. They just finished interviewing you. Give them time to think. You’re going to go home and decide whether you’re interested, they need time to think too. Don’t put them on the spot like this.

8. Be human. You don’t need to seem perfect in the interview to get hired.

9. Learn the interviewer’s name and use it. You will build a stronger bond/rapport with the interviewer if you do this, and they’ll be more likely to remember you favorably and hire you.

10. Be upfront and use clear language. Don’t use vague language and don’t lie. They’ll usually know. Hiring managers interview a lot of people and have a great sense for this

11. Never badmouth. Don’t badmouth former bosses, former employers, coworkers or anyone else. So never, ever badmouth anyone from your past in your interview.

12. Make everything about them. Start thinking about what the company wants. Make yourself seem like a solution to their problems.

Sumber: repositori.kemdikbud.go.id

Baca artikel seputar teks prosedur lainnya dengan mengeklik tautan ini.